If you like scooters and would like a business opportunity where you can make money and enjoy your passion for scooters at the same time, send an email to mike@provoscooter.com and we will tell you about it.

You're currently on:

Uni Air Vent

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Uni Air Vent

Uni Filtered Air Vent

Email to a Friend

Be the first to review this product

Availability: Out of stock.


Quick Overview

A performance alternative to the aftermarket air filter. Drill a few holes in your stock air box for these Uni Filtered Air Vents and in no time your engine will be getting all the air it needs. (Priced per vent)

Product Description

Uni's foam Filtered Air Vents increase the amount of air to the air filter for a better air supply and improved performance. These air vents let your engine breath more without going to the extremes of removing the stock air box.

The removable foam element may be cleaned and re-oiled for years of dependable service. Uni foam Filtered Air Vents work great in a wide range of applications. In some airboxes, airflow may be improved enough that re-jetting may be required for optimum performance and engine protection.

Uni Filtered Air Vents are not meant to be primary air filter elements. They are a pre-filter designed to remove only large contaminants will improving air flow to the air filter element.

The Uni Air Vents are 1" in diameter that are inserted into holes drilled in your stock air box. (See install instructions below) If you need more air just add another filter.

With this setup you don't have the increased noise level you will with removing the airbox and using the Uni Pod Filter. However the maximum air flow is still limited by your air filter.

Price is per vent.

1. Drill a 1" hole in the airbox on a flat surface, on the "incoming" air side of the air filter
2. Push the vent into the hole until it "pops" into place.
3. When cleaning is required, remove only the foam element, leaving the plastic body in place. Clean the foam in warm soapy water, let dry and re-oil. Remove all excess filter oil before re-installing the foam.

Additional Information

SKU 15.70373
Manufacturer Uni Filter
Manufacturer SKU 804451070373

Product Tags

Add Your Tags:
Use spaces to separate tags. Use single quotes (') for phrases.