|
|
#1
03-08-2010, 05:08 PM
|
||||
|
||||
Custom Airbrush Artwork
As I've said in the pictures section, My Bro. Sam Nelson, http://www.flickr.com/photos/3675944...7615849196551/, is an old time airbrush Guru. For many years he had a shop at Daytona Beach, Fl. I met him when I was working at an airport awhile back, where he'd done a beautiful mural of an eagle on one of their OH-6 Helicopters. http://www.airport-data.com/aircraft/photo/165395.html. Recently, when I finally found a full face helmet (XXXXL) large enough to protect my oversized noggin!
 I called him to see if he'd do some patriotic artwork on it. The economy had just put him out of work, and I was one of his first customers at his new shop. I rode my Yammy C3 Scooter the 45 miles over to his house today, and left my front and side covers for him to continue the theme he'd put on my helmet. I'll have them back and reinstalled by Friday, and post pics for you to view. His new phone # is 334 403 8867 Give him a call and get a really good price, & quick service, before word gets out that he's back in business and he gets covered up! Gabe
__________________
'07 Yamaha C3 Scooter, 8800mi, 3.18:1 Polini gears, Yamalube 10w-40 synthetic oil, stock derestricted,C3variator; Shimmed out with a 3/32" spacer, 4gr Dr.Pulley sliders. Briudgestone ML-50 tires, '09 Zuma-158, 2950mi, 155cc cylinder kit, 10 Hole Injector, Polini 3.30 rear gears, (higher lift camshaft, and 32mm throttlebody, soon to be added.) Dual headlight mod,and a Corbin saddle. "You never see a scooter parked in front of a Psychiatrist's office!"-Gabe
Last edited by Gabe502000; 03-08-2010 at 05:27 PM. 
|
|
#2
03-08-2010, 05:15 PM
|
||||
|
||||
|
That's some serious tallent.
|
|
#3
03-08-2010, 05:30 PM
|
||||
|
||||
|
Nice work!!!!
|
|
#4
03-08-2010, 05:41 PM
|
||||
|
||||
|
Wait 'till you see what my C3's going to look like!
__________________
'07 Yamaha C3 Scooter, 8800mi, 3.18:1 Polini gears, Yamalube 10w-40 synthetic oil, stock derestricted,C3variator; Shimmed out with a 3/32" spacer, 4gr Dr.Pulley sliders. Briudgestone ML-50 tires, '09 Zuma-158, 2950mi, 155cc cylinder kit, 10 Hole Injector, Polini 3.30 rear gears, (higher lift camshaft, and 32mm throttlebody, soon to be added.) Dual headlight mod,and a Corbin saddle. "You never see a scooter parked in front of a Psychiatrist's office!"-Gabe
|
|
#5
03-08-2010, 06:57 PM
|
||||
|
||||
|
Quote:
__________________
'07 Yamaha C3 Scooter, 8800mi, 3.18:1 Polini gears, Yamalube 10w-40 synthetic oil, stock derestricted,C3variator; Shimmed out with a 3/32" spacer, 4gr Dr.Pulley sliders. Briudgestone ML-50 tires, '09 Zuma-158, 2950mi, 155cc cylinder kit, 10 Hole Injector, Polini 3.30 rear gears, (higher lift camshaft, and 32mm throttlebody, soon to be added.) Dual headlight mod,and a Corbin saddle. "You never see a scooter parked in front of a Psychiatrist's office!"-Gabe
|
|
#7
03-08-2010, 07:28 PM
|
||||
|
||||
|
I won't But you can contact Sam Nelson at <havegunz@gmail.com> or 334 403 8867 And... http://www.flickr.com/photos/3675944...57615849196551 Once you open his flikr site, click on any of the pictures to further open the site, and access his "Tags." Gabe
__________________
'07 Yamaha C3 Scooter, 8800mi, 3.18:1 Polini gears, Yamalube 10w-40 synthetic oil, stock derestricted,C3variator; Shimmed out with a 3/32" spacer, 4gr Dr.Pulley sliders. Briudgestone ML-50 tires, '09 Zuma-158, 2950mi, 155cc cylinder kit, 10 Hole Injector, Polini 3.30 rear gears, (higher lift camshaft, and 32mm throttlebody, soon to be added.) Dual headlight mod,and a Corbin saddle. "You never see a scooter parked in front of a Psychiatrist's office!"-Gabe
Last edited by Gabe502000; 03-08-2010 at 07:36 PM.
|
|
#9
03-08-2010, 07:44 PM
|
||||
|
||||
|
It varies according to what you want done. All orders include your paying for either Fedex, USPS, or UPS charges both ways. Plus, whatever he charges for your particular work. Best thing for you to do is call Sam at 334 403 8867 ....Or, email him at havegunz@gmail.com> Gabe
__________________
'07 Yamaha C3 Scooter, 8800mi, 3.18:1 Polini gears, Yamalube 10w-40 synthetic oil, stock derestricted,C3variator; Shimmed out with a 3/32" spacer, 4gr Dr.Pulley sliders. Briudgestone ML-50 tires, '09 Zuma-158, 2950mi, 155cc cylinder kit, 10 Hole Injector, Polini 3.30 rear gears, (higher lift camshaft, and 32mm throttlebody, soon to be added.) Dual headlight mod,and a Corbin saddle. "You never see a scooter parked in front of a Psychiatrist's office!"-Gabe
|
|
#10
03-09-2010, 05:32 AM
|
||||
|
||||
|
Work like that doesn't come cheap. I have a friend (owns an indie M/C shop in New Milford, CT) who does airbrushing. He once quoted me $100.00/hr and estimated 8 to 10 hours for the work I wanted. Of course this was back in 2000, right after he took second in the Daytona Rats Hole 650 and under class for a custom Bonniville. Might be able to negotiate a better deal these days.
And his work isn't as good as Sam's.
|
|
#11
03-09-2010, 07:06 AM
|
||||
|
||||
|
His prices are reasonable. give him a call at 334 403 8867 or email him at havegunz@gmail.com Better hurry before word gets out that he's painting again and he gets swamped with business!
__________________
'07 Yamaha C3 Scooter, 8800mi, 3.18:1 Polini gears, Yamalube 10w-40 synthetic oil, stock derestricted,C3variator; Shimmed out with a 3/32" spacer, 4gr Dr.Pulley sliders. Briudgestone ML-50 tires, '09 Zuma-158, 2950mi, 155cc cylinder kit, 10 Hole Injector, Polini 3.30 rear gears, (higher lift camshaft, and 32mm throttlebody, soon to be added.) Dual headlight mod,and a Corbin saddle. "You never see a scooter parked in front of a Psychiatrist's office!"-Gabe
|
|
#12
03-10-2010, 01:57 AM
|
||||
|
||||
|
I want to get some of this on my bike! I love your theme gabe god bless
__________________
70CC Athena,Tecnigas RSII,17.5MM Dell'Orto Carb 90 MJ,Athena 15/50 Upgear, Malossi Delta Clutch and wing bell w/blue clutch springs, Malossi 33mm Torque driver with Yellow Malossi Torque spring,Athena Variator with 4.4 Malossi rollers,Malossi VL 12 reed cage with CF reeds,Malossi Brake pads, Trail Tech Tachometer, Chrome fan scoop w/ chrome housing, Stage 6 Chrome Kick Starter,Genuine Yamaha Bar Ends.Dual Headlight Mod,Michelin Bopper front tire and Pirelli SL26 Rear tire,Motul full syn oil, BR9HS  Team provo moderator, keep on scootin "scooter troops" 
|
|
#13
03-10-2010, 06:43 AM
|
||||
|
||||
|
www.havegunz.com Custom airbrush work....
Thanks! It was a nice day, so I rode my C3 scooter, sans panels and covers, the 45 miles to Sam's house yesterday. Business is daily improving, as word gets out that he's back in business again & he's kinda covered up. So, It's going to be monday or tuesday before I get my panels back on my scooter. I'll take pics and post them then. Blessings, Gabe
__________________
'07 Yamaha C3 Scooter, 8800mi, 3.18:1 Polini gears, Yamalube 10w-40 synthetic oil, stock derestricted,C3variator; Shimmed out with a 3/32" spacer, 4gr Dr.Pulley sliders. Briudgestone ML-50 tires, '09 Zuma-158, 2950mi, 155cc cylinder kit, 10 Hole Injector, Polini 3.30 rear gears, (higher lift camshaft, and 32mm throttlebody, soon to be added.) Dual headlight mod,and a Corbin saddle. "You never see a scooter parked in front of a Psychiatrist's office!"-Gabe
|
|
#14
03-14-2010, 07:11 AM
|
||||
|
||||
|
Um Aktien ist, was es überhaupt geht, mein Freund. Wie ist das Wetter in der Vaterländischen dieser Zeit des Jahres?
Last edited by Blackbomber; 03-14-2010 at 07:12 AM.
|
|
#15
03-14-2010, 03:05 PM
|
||||
|
||||
|
Quote:
BTW; hes aus dem Irak oilyhans translation: not speak any German attempt English! & hes from Iraq
__________________
2003 Vino classic stage 0.75 de-reged stock variator w/8g sliding weights. 1500 rpm torque spring 1500 rpm clutch springs. 42mph 2005 veniceLX unrestricted 43 mph 2005 Triton R4 unrestricted 50 mph mine no more. Scooter Dealer for Adly,TGB &TNG Tuning parts MRP-Speed parts Leo Vince pipes PmTuning parts Last edited by harry; 03-14-2010 at 03:08 PM.
|
|
#16
03-14-2010, 04:21 PM
|
||||
|
||||
|
Not according to his IP address.
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
