Starting Trouble

[Freakyelf5]

Ok so I finially got my carb and I believe to have it installed correctly, but my vento will not fire. It creates spark, and it should be getting fuel, but it won't fire

[jody]

remove spark plug and see if it's wet with fuel.

see if your carb is getting fuel might have somthing blocking the fuel(valve ect.)

fuel,compression,spark should run :confused:

[Freakyelf5]

See thats the problem, for some reason its not getting fuel to the cylinder. The vac line is good, all the lines r hooked up to the right place. ANy insight on what would be blocking the fuel inbetween the carb and the cylinder. I just installed a brand new carb so it should be completly clean

[jody]

remove the vacume line and fuel line and suck on the vacume line to see if fuel flowes out the other line if it does it's in the carb

[Freakyelf5]

The problem is in the carb?

[jody]

hook up a clean hose to the fuel inlet of the carb and blow in it it should not be blocked unles it is full of fuel

is this a zipr3i

[Malformed]

mine wont start either, dont feel bad. ;)

[Lennox]

are you guys starting ok now??