2000 zuma leovince zx pipe

[hybridrazz]

ive heard ppl sayin on here the zx pipe doesnt make good power on the 2002 up zuma but what about our older style zuma's the pipe has less bends thanks for any reply's.

[Lennox]

Ask Jered, I am still searching for a high rev Late model Zuma pipe. Any info please post!!!!

[Zuma88]

i have a 1999 zuma
the leo is good for take off but not good for high speed.

the tecnigas is better if you are ordering from here

[XPS1210]

yep... That's how it is on the 02 and late... good take off and not a whole lot on the top end...

I could careless about doing wheelies and such... I want to get over 60... one day I'll figure it out...

[rydah]

i have a polini evolution pipe on my zuma and it loves to be rev'd. the bottom and mid is really good too, wheelies are not problem. i think the evo and mhr might be the best pipe out there for the older style motors.

[Zuma88]

i agree, but i bought a jollymoto pipe and that thing is crazy it pulls from bottem to top end it gave me about 9mph

[rydah]

i agree, but i bought a jollymoto pipe and that thing is crazy it pulls from bottem to top end it gave me about 9mph
i was going to put that pipe in with the evo and mhr but most people in this forum dont even know about the euro parts. in fact i bet that pipe is better than the evo or the mhr. too me it sure looks better. what kind of speeds are you getting with that pipe and how much did it cost you.

[hybridrazz]

i havent installed the zx pipe but you guys think top speed will be around 60? i have the polini corsa kit and a dellorto 17.5 carb,and polini carbon reeds i was hittin 52 with the stock pipe with this setup. i plan to get the polini evo soon.

[hybridrazz]

Oh buy the way guys i have all these old school zuma parts on my razz had to do some little mods to make them fit ,something diffrent for sure fastest razz around im thinkin lol.

[rydah]

[QUOTE=hybridrazz]i havent installed the zx pipe but you guys think top speed will be around 60? i have the polini corsa kit and a dellorto 17.5 carb,and polini carbon reeds i was hittin 52 with the stock pipe with this setup. i plan to get the polini evo soon.[/QUOT
the polini evo cylinder kit is a very good choice. just make sure that when you order it, its the one with the bridge port exhaust and not the one with the W port exhaust.

[hybridrazz]

[QUOTE=hybridrazz]i havent installed the zx pipe but you guys think top speed will be around 60? i have the polini corsa kit and a dellorto 17.5 carb,and polini carbon reeds i was hittin 52 with the stock pipe with this setup. i plan to get the polini evo soon.[/QUOT
the polini evo cylinder kit is a very good choice. just make sure that when you order it, its the one with the bridge port exhaust and not the one with the W port exhaust.

Where can i find the polini evo parts rydah? i know a few sites but ive only seen polini parts on badmotorscooter which id never order from again learned my lesson before i found provo was just wondering thanks for the help.

[rydah]

here is one of the best sites for checking out pix of the performance parts.
http://www.50cc.nl/frameset_eng.htm
heres another good site too.
http://www.scootercenter.com/1024-de.htm
if you dont want to order from those guys i have a friend that owns a moped shop out here in hawaii. its called cycle imports of hawaii he might have a polini evo for your zuma. i get all my polini yamaha parts from him. you can give them a call at 808 952 9253, or you email him at cycleimportsofhi@aol.com his name george. i have been thinking about changing my mhr cylinder over to a polini evo cylinder because everything on my zuma is all evo so i would like everything to 100% match.