oil mix

[jody]

I am going to remove my oil injection pump.I need to know how to mix the fuel and oil.

How many oz of oil to one gallon of fuel :confused:

what is the best for my 70cc zip r3i :cool:

any help will be good

[Elliott]

Why are you removing the oil injection pump is it not working Jody!!

But i can see why? some times you just can't Trust that Automated Stuff..

Installation Instructions for 70cc Performance Kits

1. Use a high quality synthetic two-cycle engine oil. Mix 4 oz. per gallon during the break-in period. Mix 2 1/2 oz/ per gallon after the break-in period, or use the oil injection system 50:1.

You might want to get other Source of info before reading this..

USE 4 OZ. FOR PREMIX FOR NON-OIL INJECTION SYSTEMS, OR 2 OZ. FOR OIL INJECTION SYSTEMS.

[XPS1210]

to start this has been brought up before... Don't premix with the injection installed and working...

You still will have an unreliable amount of oil in the system...

Jody your removing it since the 70cc cylinder you got will not work with it installed right...

--------------------------------------------------------------------------------

Ilike 40:1. with no injection!


The equation is simple. There are 128 oz in a gallon. 1oz of oil to a gallon is 128:1 2oz=64:1 3oz=32:1

basically with a 1.5 gallon tank you will need about 5 oz of oil per tank...

There is 192 oz in 1.5 gallons (the vino and zuma tanks)... You will need 5 oz of oil for 200oz of gas...

So it's a hair less than 5 oz per tank of gas... at 40:1 ratio...

[jody]

that is rite i'm removing it because the cooling fin is hitting it.

doth of you thanks for your help :D