View Full Version : About to install stage 2
Hawaii 50
05-03-2006, 07:46 PM
Ok so before I get into this I just want to get some clarification on a couple things.
-The hook ups on the new carb, the two clear lines going into a larger clear tube. Are they just overflow tubes and don't attach anything to them?
-The oil adjustment. How much should I back off the cable to get enough oil for the new set up? I have seen 2 turns and 5 turns out.
-The bug eye zuma reeds will work with my Triton GT5?
Thank you in advance, -Chris
Hawaii 50
05-03-2006, 08:00 PM
Some pictures to clarify.
Hawaii 50
05-03-2006, 08:29 PM
Also in the second picture the screw that is flush is the air/fuel correct? And the one on the opposite side is the Idle air screw if i'm not mistaken.
Hawaii 50
05-03-2006, 09:28 PM
Now I am really upset! I have the wrong freaking cylinder! I have specified the 12mm in the ordering process, however I have recieved the 10mm. Now I find this out after I have the whole thing apart! This is after I waited over a month for the RS pipe then got sent only two of the three clutch springs with my order, then recieved the clutch spring but none of the three spark plugs that I ordered and paid for on the 11th of April, and still haven't recieved. I had a local shop order some plugs and that got here in less than a week. This is completely F'd up! There is a major lack of organization in the ordering process and it needs to be fixed. I am really regreting spending my money with Provo right now and I hope Erich does something to fix this. -Chris
str8dum
05-04-2006, 04:56 AM
you can buy plugs from any auto store. you dont need to pay mail order prices and shipping on them.
Just a heads up.
VINOGT
05-04-2006, 07:46 AM
The clear lines on the carb are just overflow lines, you have everything else correct.
XPS1210
05-04-2006, 08:43 AM
I am really regreting spending my money with Provo right now and I hope Erich does something to fix this. -Chris
Since Erich doesn't monitor the forums... you'd be better off emailing him!
I understand the frustration though... it can be upsetting to get the wrong part when you wait as long as you did to get the parts...
Shoot erich an email at sales@provoscooter.com and he'll get it straightened out..
Hawaii 50
05-04-2006, 01:52 PM
you can buy plugs from any auto store. you dont need to pay mail order prices and shipping on them. Just a heads up.
Unfortunately you can't when you live on an island in the middle of the Pacific. I tried every auto parts store, and the two motorcycle shops, even the marina and some boat shops. Nothing!
Thank you Jared for your reply, I actually did e-mail Erich right after I posted and he replied back fairly quickly. He is taking care of me, I was just upset because it has been one thing after another. I am calm now though.
VINOGT thank you for the clarification. When I do get all the right parts I am going to be able to fly through the installaton, these bikes are really easy to work on.
vBulletin® v3.8.1, Copyright ©2000-2012, Jelsoft Enterprises Ltd.