Back Turn signals all in one with the tail light

[mxracer945]

I was wondering if anyone has took there back turn signals all into one in the back tail light.. I remember reading somthing about this in another topic.. But yeah if anyonce could help me out that'd be great give me a website or something to go to.. I was also looking for some websites that have alot of aftermarket parts for the zuma.. If you want to AIM them to me ShaneInsane94 is my AIM screenname..

[mxracer945]

http://www.yamaha-motor.de/Images/2005_CW50RS_Photo_01_tcm37-51890.JPG

http://www.bcd-design.com/images/produits/booster_optique_noir_2.jpg
Something like this and I was also wanting to know where I can get these front light bracketing and these lights.. and I was also wanting to now where to get the cat eye turn signals for the front..

[Malisaw]

How about..... umm... http://www.provoscooter.com ? :ll

That is for aftermarket parts --- not sure about the lights you are looking for... but this forum is here to support provoscooter.com -- maybe someone will PM you a link, but certainly check with Provo for availability!

[mxracer945]

Well I shoulda been more specific lol.. I was talking about modifications to like the turn signals, and other SheT like that.. But yeah I already orderd me a pipe and carbon fiber reeds but its on Backorder I guess.. LoL and yes I do see that the admin is very strict about posting links to other sits witch I don't blame him cuzz it'll take business away from his site.. But im sure they'll get a couple hundred outta me.. But yeah they just dont have everything liek some of the other sites i've been seeing about.. provo is more about performance not looks im about the perforance and the look.. But you could have the ugliest scooter and its fast as hell. LoL you don't have a zuma any way so it was pretty much pointless to post in this topic.. you could of least helped me if your even gonna bother to post

[Lennox]

http://www.provoscooter.com/vbull/article.php?a=37

[mxracer945]

Yeah I had all this shet apart last nite.. I took off the light that shines on the license plate I wonder if thats illegal shouldnt be.. and was looking at the 2 seperate peice on the sides.. Yeah that sounds pretty simple but I think I'd end up *potty mouth**potty mouth**potty mouth**potty mouth*ing sumething up prolly have my neighbor help with that when I get my pipe and reeds..

[XPS1210]

wow... nice language...

the light MUST be on your license plate as it's a DOT requirement...

[bryeod]

Here's what I did:

Under the stop light there's a plastic plate. I took off the light that illuminates the license plate and mounted the plate right under the tail light. I drilled several holes in the plate. The tail light is illuminated constantly, and now some of the light is directed to the plate. Check out a Jeep or trailer light and you'll see what I did.

Wow, I just read my post and it confuses me. Basically, drill holes under the tail light and put your plate right under it.

[cstaup]

You can also remove the plastic piece and replace it with a polycarbonate (clear plastic) picture holder, I found one for $0.95 USD at Wally-World.

Totally legal and will not let any garbage in.

[XPS1210]

just look at the how to I wrote... it tells you EVERYTHING that's been mentioned here with moving the lights, etc...

[mxracer945]

Well yah my tail light s hines rite down on it.. I did see how you drilled holes and mounted the licensce plate light rite buy the tail light.. I will soon do that but im gonna drill all them holes once I figure out how ima put the back turn signals in with the tail light..

[XPS1210]

but im gonna drill all them holes once I figure out how ima put the back turn signals in with the tail light..

the how to tells you a good way... some people have also bought bulb holders from a local parts store and mounted them into the housing...

[mxracer945]

So did you use the Yell turn signal covers and just some how cut them to where they'd fit in.So you would use the bulb holders out of the turn signals and dill a hole in the silver peice on each side.. OR did you sue the ones that came off each side of the tail light and just left the turn signals red..

[mxracer945]

LOL nevermind confused my self.. I seen some turn signals that I liked in a catalog.. But yeah I will have to end up getting the license plate light mounted back on somehow.. But yeah I have my tail lite shinen rite on it.. But im just gonna let it go and see if a cop decides to stop me witch in indiana I think I could get away with it more here.. But just have to wait and see Im thinking about butting tyhat on whole plastic piecec back on just to call it safe but I like it how it is with out that license plate holder.. and the licensce plate lite not there..

[scooter sam]

I saw a China copy of a bug-eye Zuma in a local pawn shop with amber lenses next to the tail light, instead of our red ones. The tail/flush mounted signals looked neat and clean. All the decals were missing so I have no idea who copied/made it. The front signals are also body mounted with amber lenses, in place of the little "Yamaha" plugs on the front. I went back to get a picture of it for the site but it sold. Ill keep an eye out for it and post pics when I see it again.