PDA

View Full Version : what weights?


rockettoaster
08-05-2004, 11:25 PM
I am new to the whole CVT thing. When i first recieved my scooter we took the stock exhaust off, put the tecnigas tek exhaust on and rode it around, it seemed like it got to about 30 decent but i didnt go any faster seeing as the speed limit was 25 and i didnt have my tag yet. I decided to try the weights that came with the pipe and have a 12 mile drive to work. it seems like it gets to 25 rather quick loses all power then at 40 jets to 50-55 depending on wind. I weigh about 210 and would like to know what weights might be sugested and if i can use combinations of weights to fine tune it. The stock weights were kinda yellow-white and the ones with the pipe are grey. Any help would be great.

XPS1210
08-05-2004, 11:29 PM
might try a mix of 3 each... for some reason that's usually the magic key and then you have a spare set as you use 3 each and have 3 each extra...

My issue is after the engine gets warm is boggs a little in the take off and pulls fine after that...

erich
08-06-2004, 06:04 PM
To get full advantage of the pipe, it is a good idea to upgrade the variator if the advice from the previous post does not help.