2004 Zuma, with a side stand installed

[XPS1210]

I ended up making a interesting mounting bracket for it... was much easier and no welding needed...

HEre are some pics...

[Lennox]

very cool!

did you use some sort of clamp?

[cant drive 55]

The scooter is lookin pretty good Jered. But I'm guessing that you still aren't done with it yet, probably more body stuff.

[XPS1210]

sort of...

grade 8, 3/8" bolts... with 1/4" x 1" strip of steel on the top and bottom of the cross brace under the floor panel...

I mounted 3 bolts through it so it was "strong and would support the weight"... then mounted the kickstand on the underside as the instructions stated from the place I bought it...

[XPS1210]

never done... it's a never ending thing.... as my scooter garage says... it's an obsession!

[King Vino]

Lookin good there, buddy.

[Chreaus]

Great stuff Jered.
It's crazy how much you get done with a big family.
I can't get much done alone

[XPS1210]

well.. nap time is awesome! I actually get most of my install and mods done during 1 hour naps times... The older 2 (4 year olds) are pretty good and keeping themselves busy...

Besides that it's winter in alaska... it's either make more kids or find something else to entertain the time... and I don't want more kids... you know!

[florida derbi rocket]

Jered? does your wife Ride?? 4 year olds turn into 14 year olds in the blink of an Eye ;) ...And I can see more scooters in your family future :D ..(DAD!! He Turned my idle screw Down!!)...(I DID NOT!)...Damn Kids...Now I have to Retune BOTH of Your Scooters...C'mere and Watch......(Remember More Scooters are still Cheaper than More Kids!!)......John

[XPS1210]

yep... I want the wife to get one.. but she burned her leg as a kid and is scared to death of 2 wheels...

I tried already to get he one... maybe I can get her into a vino or something when we move... Got the yamaha card still active in case she says yes... heck, I want a second one for a "spare" for tuning days and stuff....

[aimee]

Hi Jered,

I really need one of these kickstands as I can't lift the bike on the stock stand. How can I get one? It sounds difficult? Any recommendations would be greatly appreciated. :confused:







I ended up making a interesting mounting bracket for it... was much easier and no welding needed...

HEre are some pics...

[XPS1210]

Did you view the how to section? It's got info on how I installed mine...

I'd look on ebay and try and find a cheap used one... then work that... as mine cost me over $60 for it and was not bolt on... there are some that mount via a clamp to the frame... might be an option...