View Full Version : Time for you to help a NOOB to mod
Booya
01-16-2005, 05:01 PM
Ok, I've been on my 2004 Zuma for a year. A year without any mod. I got tired of going 40 mph, so I put a RX pipe kit on it. 40 to 45 MPH. It felt good, and now i'm still hungry for more. I read the forums and I think it's incredible what some of you have done to your Scoots. Now I would ask if you could help me out and let me know how to get to that higher level that me and my "Pigglet" are hungry for? I want to know how to lead traffic and not just watch as they pass me by.
Thanks to any who can help.
Snyeed
01-16-2005, 07:34 PM
The most common mods are 70cc kit, Bigger carb, Maybe a new exhaust that will go with the 70cc and a variator kit. Those mods should should diffently give you what your looking for.
The stage kits provo sells are really good starter kits. Not to expensive and will help you get to learn about 2 stroke engines(if you dont know)
XPS1210
01-16-2005, 08:11 PM
I ordered the stage 2 kit from provo... was pretty simple to install... the only thing I'd recommend is to get the Malossi Variator instead of the Technomoto ones...
If you need more info... let us know... the kits provo sells are awesome to start off with... and then if you wish to go further with modding... Just let him know and he'll get parts/prices etc...
King Vino
01-16-2005, 08:34 PM
One of the things folks don't realize on here is that Erich will do custom kits and build to order specs on a lot of things that he doesn't list on the web site. The store is more of a basic kit example of what Provo can offer.
XPS1210
01-16-2005, 08:37 PM
95% of my parts on my scooter are from provo... see my sig... the only thing that isn't is my tires... I think everything else was from provo...
I'm 100% happy with the service I have recieved... that's why over $1500 of my cash has been invested with Provo...
He has always got quotes within a few days as well as some awesome info...
Currently trying to figure the cylinder I'm getting next... With his info and others I think I'm stearing away from the MHR replica kit...
Might go with the Polini corsa... not sure...
florida derbi rocket
01-16-2005, 09:18 PM
...You might not wan't to get rid of the pipe you bought..But if you get a "70cc Kit" the pipe will be tuned and matched to your Carb/cylinder/piston....You can always get rid of that puppy on E-bay..When it comes to tuning Your "variator" (attached to the crank)...and your clutch...(the back of the crankcase)..This forum will help you real fast..they will give you detailed instructions on how to do this stuff yourself..if you have a problem...STOP!!..and post and ask....They will help.. :D ...Welcome to the boards ....And remember..Erich can get you the stuff you need............ Email Provoscooter (Sales@provoscooter.com) .......John
Snyeed
01-16-2005, 11:54 PM
wonder if erich can order me some DelloOrto jets for cheap? :cool:
XPS1210
01-17-2005, 12:24 AM
well... the only way to know is to email...
If there is a large market for them with provo... I'd bet he'd stock them...
Booya
01-18-2005, 03:03 PM
Thanks all for the good info. I will let you know what i decide to do.
vBulletin® v3.8.1, Copyright ©2000-2012, Jelsoft Enterprises Ltd.