XPS1210
12-30-2004, 11:48 PM
$139.00 Get it here (http://www.provoscooter.com/shop/product_info.php?cPath=34&products_id=101)
This is the Malossi (Italian made) cast iron 70cc cylinder kit. It features increased torque when installed with the stock pipe (alt. Stage 1).
When installed with a Tecnigas pipe and Arreche carb (Stage 2) it has a 55-60mph top speed and break-neck acceleration. If installed with an expansion chamber pipe, you must upgrade the carb to ensure reliability.
Also suggested with this kit is a performance clutch and multivar, to ensure the power to be delivered to the wheel efficiently.
NOTE: If you have a 2004 Vento, and your bike uses a 12mm wrist pin, you will not be able to use this kit, you will have to get an Airsal Aluminum kit (http://www.provoscooter.com/shop/product_info.php?cPath=34&products_id=103).
http://www.provoscooter.com/shop/images/Malossi70ccCastNew.jpg
This is the Malossi (Italian made) cast iron 70cc cylinder kit. It features increased torque when installed with the stock pipe (alt. Stage 1).
When installed with a Tecnigas pipe and Arreche carb (Stage 2) it has a 55-60mph top speed and break-neck acceleration. If installed with an expansion chamber pipe, you must upgrade the carb to ensure reliability.
Also suggested with this kit is a performance clutch and multivar, to ensure the power to be delivered to the wheel efficiently.
NOTE: If you have a 2004 Vento, and your bike uses a 12mm wrist pin, you will not be able to use this kit, you will have to get an Airsal Aluminum kit (http://www.provoscooter.com/shop/product_info.php?cPath=34&products_id=103).
http://www.provoscooter.com/shop/images/Malossi70ccCastNew.jpg