XPS1210
12-19-2004, 05:47 AM
$99.00 Get it here (http://www.provoscooter.com/shop/product_info.php?cPath=33&products_id=142)
This is the Malossi upgear kit. It will change the final gear ratio on your scooter so that a higher top speed can be achieved. It also uses straight cut gears so there is less torque lost in the gear mesh. It is recommended that you only use this kit in conjuction with other performance upgrades, although, you may be able to use it with the stock setup, but it may rob you of some of your lower end (take off and acceleration) performance.
This is a great addition to any Stage 2 (http://www.provoscooter.com/shop/product_info.php?cPath=33&products_id=84) equipped scooter.
Upgear Install instructions here (http://www.provoscooter.com/vbull/article.php?a=30).
http://www.provoscooter.com/shop/images/primarygears.jpg
Review:
okay, to start this added about 7mph to my scooter...
2nd, that's in addition to all the other mods I have done...
This was a simple install, except you are probably gonna need access to a press... I have a local shop that did it for me for $7.00... There are 2 different pieces as in the photo... One is the piece that the clutch and rear assembly rides on, the other is a larger gear.
Both need to have a piece pressed off the old parts and installing these in their places.
Without access to a press, this is an almost impossible upgrade... However well worth the money and probably the largest speed improvement I have done on my scooter!
highly recommend this part!
This is the Malossi upgear kit. It will change the final gear ratio on your scooter so that a higher top speed can be achieved. It also uses straight cut gears so there is less torque lost in the gear mesh. It is recommended that you only use this kit in conjuction with other performance upgrades, although, you may be able to use it with the stock setup, but it may rob you of some of your lower end (take off and acceleration) performance.
This is a great addition to any Stage 2 (http://www.provoscooter.com/shop/product_info.php?cPath=33&products_id=84) equipped scooter.
Upgear Install instructions here (http://www.provoscooter.com/vbull/article.php?a=30).
http://www.provoscooter.com/shop/images/primarygears.jpg
Review:
okay, to start this added about 7mph to my scooter...
2nd, that's in addition to all the other mods I have done...
This was a simple install, except you are probably gonna need access to a press... I have a local shop that did it for me for $7.00... There are 2 different pieces as in the photo... One is the piece that the clutch and rear assembly rides on, the other is a larger gear.
Both need to have a piece pressed off the old parts and installing these in their places.
Without access to a press, this is an almost impossible upgrade... However well worth the money and probably the largest speed improvement I have done on my scooter!
highly recommend this part!