XPS1210
12-19-2004, 05:41 AM
$489.00 Get it here (http://www.provoscooter.com/shop/product_info.php?cPath=33&products_id=84)
This is the Stage Two performance package as outlined in the Tuning Section (http://www.provoscooter.com/shop/howtotuning.php). It features an Airsal 70cc aluminum cylinder (http://www.provoscooter.com/shop/product_info.php?cPath=33&products_id=145), Arreche 19mm carb with auto choke (http://www.provoscooter.com/shop/product_info.php?cPath=33&products_id=133), performance airbox, Tecnigas Next R Chrome (http://www.provoscooter.com/shop/product_info.php?cPath=33&products_id=81) or Tecnigas RS Chrome pipe (http://www.provoscooter.com/shop/product_info.php?cPath=33&products_id=172) (see options below), Tecnomoto Variator (http://www.provoscooter.com/shop/product_info.php?cPath=33&products_id=92), and Clutch springs.
Install instructions for cylinder are here (http://www.provoscooter.com/shop/howto70cc.php), carb here (http://www.provoscooter.com/shop/howtocarb.php), variator here (http://www.provoscooter.com/shop/howtotecnovar.php), pipe and clutch springs here (http://www.provoscooter.com/shop/howtostage1.php).
If you already have Stage One (http://www.provoscooter.com/shop/product_info.php?cPath=33&products_id=83), check out the Stage Two Upgrade (http://www.provoscooter.com/shop/product_info.php?cPath=33&products_id=85)!
This package will get you incredible acceleration and unbelieveable top speed. Most Zumas with this setup easily reach 55mph and some even more!
http://www.provoscooter.com/shop/images/stage2.jpg
Review:
All I can say is AWESOME! It takes some tuning to get it right... So take your time. Make sure you have the tune correct or you will end up replacing your cylinder...
Makes an awesome amount of power! Hauls butt off the line, however on the zuma for some reason it's still lacking in the top end. I think that the zuma has lower gearing than the Vino... Gears are available from provo as well as this kit. For an additional $99.00
I haven't recieved my gears yet but am betting that will be the MAJOR difference part with my HEAVILY modded Zuma...
MAke sure to get Carbon Fiber Reed Valves and a Kevlar belt... You wouldn't want the stock valves to break and damage your modded scooter... As well the stock belt will wear extremely fast with this set up... Kevlar will last longer!
DEFENATELY WORTH THE MONEY!
Only draw back is you have to make sure you tune it right! Other than that... Check the forum for info on how to get this installed and hints for using the stock cables instead of worrying about buying bike cables and having to make theose fit...
This is the Stage Two performance package as outlined in the Tuning Section (http://www.provoscooter.com/shop/howtotuning.php). It features an Airsal 70cc aluminum cylinder (http://www.provoscooter.com/shop/product_info.php?cPath=33&products_id=145), Arreche 19mm carb with auto choke (http://www.provoscooter.com/shop/product_info.php?cPath=33&products_id=133), performance airbox, Tecnigas Next R Chrome (http://www.provoscooter.com/shop/product_info.php?cPath=33&products_id=81) or Tecnigas RS Chrome pipe (http://www.provoscooter.com/shop/product_info.php?cPath=33&products_id=172) (see options below), Tecnomoto Variator (http://www.provoscooter.com/shop/product_info.php?cPath=33&products_id=92), and Clutch springs.
Install instructions for cylinder are here (http://www.provoscooter.com/shop/howto70cc.php), carb here (http://www.provoscooter.com/shop/howtocarb.php), variator here (http://www.provoscooter.com/shop/howtotecnovar.php), pipe and clutch springs here (http://www.provoscooter.com/shop/howtostage1.php).
If you already have Stage One (http://www.provoscooter.com/shop/product_info.php?cPath=33&products_id=83), check out the Stage Two Upgrade (http://www.provoscooter.com/shop/product_info.php?cPath=33&products_id=85)!
This package will get you incredible acceleration and unbelieveable top speed. Most Zumas with this setup easily reach 55mph and some even more!
http://www.provoscooter.com/shop/images/stage2.jpg
Review:
All I can say is AWESOME! It takes some tuning to get it right... So take your time. Make sure you have the tune correct or you will end up replacing your cylinder...
Makes an awesome amount of power! Hauls butt off the line, however on the zuma for some reason it's still lacking in the top end. I think that the zuma has lower gearing than the Vino... Gears are available from provo as well as this kit. For an additional $99.00
I haven't recieved my gears yet but am betting that will be the MAJOR difference part with my HEAVILY modded Zuma...
MAke sure to get Carbon Fiber Reed Valves and a Kevlar belt... You wouldn't want the stock valves to break and damage your modded scooter... As well the stock belt will wear extremely fast with this set up... Kevlar will last longer!
DEFENATELY WORTH THE MONEY!
Only draw back is you have to make sure you tune it right! Other than that... Check the forum for info on how to get this installed and hints for using the stock cables instead of worrying about buying bike cables and having to make theose fit...