XPS1210
12-19-2004, 05:35 AM
$229.00 Get it here
This value package includes everything you need to get to Stage One Performance. (http://www.provoscooter.com/shop/howtotuning.php)It comes with a Tecnigas Next R Chrome (http://www.provoscooter.com/shop/product_info.php?cPath=33&products_id=81) or Tecnigas RS Chrome pipe (http://www.provoscooter.com/shop/product_info.php?cPath=33&products_id=172) (see options below), Tecnomoto Variator, Roller Weights, and Clutch Springs for your stock clutch. Check the "Howto (http://www.provoscooter.com/shop/howtotuning.php)" section for expected results, but the bottom line is better acceleration and up to a 50mph top speed!!
Save on shipping and total price with this sweet package!
NEW! Now you can do it yourself with these handy step-by-step howto instructions (http://www.provoscooter.com/shop/howtostage1.php)!
Install instructions for Tecnomoto Variator are here (http://www.provoscooter.com/shop/howtotecnovar.php).
Both pipes require some modification to the mounting brackets to fit the new Zuma, check out the instructions for the Next R here (http://www.provoscooter.com/shop/howtopipe.php). Looking for more power? Try Stage Two (http://www.provoscooter.com/shop/product_info.php?cPath=33&products_id=84)!
http://www.provoscooter.com/shop/images/starterCombo.jpg
Review:
The kits is up to its own standard and it is easy to installed. (Well, that is if you have the correct tools, strength, and READ and UNDERSTAND the "How To" instruction)
The result is pretty satisfactory. Of course, it is important to note that this is only the stage 1, and I think this kits really bring the stock cyclinder and the stock carb to it's max preformance.
Here are my results:
I first use 4g roller, and I have very good acceleration and power. I can ride my BWs (or Zuma in the US. hey, I am from Canada) uphill at the spped of 60km/h(37mph). The top speed is about 70km/h(43mph).
Then I switch the roller to 5g and I lost quite a bit of acceleration. Uphill is about 50km/h but the top speed can reach to 78~80km/h(48~49mph).
I figure out that if I want more power and better acceleration without sacrificing and top speed, I will need the stage 2 kits. But after all, this stage 1 performance is really worth the money.
This value package includes everything you need to get to Stage One Performance. (http://www.provoscooter.com/shop/howtotuning.php)It comes with a Tecnigas Next R Chrome (http://www.provoscooter.com/shop/product_info.php?cPath=33&products_id=81) or Tecnigas RS Chrome pipe (http://www.provoscooter.com/shop/product_info.php?cPath=33&products_id=172) (see options below), Tecnomoto Variator, Roller Weights, and Clutch Springs for your stock clutch. Check the "Howto (http://www.provoscooter.com/shop/howtotuning.php)" section for expected results, but the bottom line is better acceleration and up to a 50mph top speed!!
Save on shipping and total price with this sweet package!
NEW! Now you can do it yourself with these handy step-by-step howto instructions (http://www.provoscooter.com/shop/howtostage1.php)!
Install instructions for Tecnomoto Variator are here (http://www.provoscooter.com/shop/howtotecnovar.php).
Both pipes require some modification to the mounting brackets to fit the new Zuma, check out the instructions for the Next R here (http://www.provoscooter.com/shop/howtopipe.php). Looking for more power? Try Stage Two (http://www.provoscooter.com/shop/product_info.php?cPath=33&products_id=84)!
http://www.provoscooter.com/shop/images/starterCombo.jpg
Review:
The kits is up to its own standard and it is easy to installed. (Well, that is if you have the correct tools, strength, and READ and UNDERSTAND the "How To" instruction)
The result is pretty satisfactory. Of course, it is important to note that this is only the stage 1, and I think this kits really bring the stock cyclinder and the stock carb to it's max preformance.
Here are my results:
I first use 4g roller, and I have very good acceleration and power. I can ride my BWs (or Zuma in the US. hey, I am from Canada) uphill at the spped of 60km/h(37mph). The top speed is about 70km/h(43mph).
Then I switch the roller to 5g and I lost quite a bit of acceleration. Uphill is about 50km/h but the top speed can reach to 78~80km/h(48~49mph).
I figure out that if I want more power and better acceleration without sacrificing and top speed, I will need the stage 2 kits. But after all, this stage 1 performance is really worth the money.