XPS1210
12-19-2004, 04:48 AM
$129.00 get it here (http://www.provoscooter.com/shop/product_info.php?cPath=33&products_id=133)
This is the Arreche 19mm high performance carburator. It features an easy to change main jet via a plug in the bottom of the float bowl and comes with jetting that works great for almost all areas and elevations. If you need to change to a different jet, it uses standard Mikuni jets that you can get at any motorcycle shop.
You can also retain your stock oil injection and Auto Choke for ease of use and stock reliability. More info and install instructions available HERE (http://www.provoscooter.com/shop/howtocarb.php) .
This carb is a must when using a 70cc kit and an expansion chamber pipe, otherwise you will run too lean as the stock carb simply cannot flow the amount of air/fuel/oil you need to lubricate and cool the bigger cylinder with the pipe.
http://www.provoscooter.com/shop/images/arreche19.jpg
Review:
Works great with the rest of the stage 2 I bought!
Definately needed with a 70cc upgrade! Pretty simple to use and tune...
Comes with an auto choke that you just tap into the current wires from the scooter (doesn't matter which wire for the 2 on the scooter side or the choke side)...
I ordered the carb with a manual choke as I live in a cold weather environment and the auto choke doesn't like the cold!
This is the Arreche 19mm high performance carburator. It features an easy to change main jet via a plug in the bottom of the float bowl and comes with jetting that works great for almost all areas and elevations. If you need to change to a different jet, it uses standard Mikuni jets that you can get at any motorcycle shop.
You can also retain your stock oil injection and Auto Choke for ease of use and stock reliability. More info and install instructions available HERE (http://www.provoscooter.com/shop/howtocarb.php) .
This carb is a must when using a 70cc kit and an expansion chamber pipe, otherwise you will run too lean as the stock carb simply cannot flow the amount of air/fuel/oil you need to lubricate and cool the bigger cylinder with the pipe.
http://www.provoscooter.com/shop/images/arreche19.jpg
Review:
Works great with the rest of the stage 2 I bought!
Definately needed with a 70cc upgrade! Pretty simple to use and tune...
Comes with an auto choke that you just tap into the current wires from the scooter (doesn't matter which wire for the 2 on the scooter side or the choke side)...
I ordered the carb with a manual choke as I live in a cold weather environment and the auto choke doesn't like the cold!