If you like scooters and would like a business opportunity where you can make money and enjoy your passion for scooters at the same time, send an email to mike@provoscooter.com and we will tell you about it.

You're currently on:

Arreche 819 19mm carburetor

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Arreche 819 19mm carburetor

Arreche 19mm Performance Carburetor - Honda/Kymco

Email to a Friend

Be the first to review this product

Availability: Out of stock.


Quick Overview

The Arreche Carburetor is a must for anyone looking to mod their scooter. Make sure your engine gets all the fuel it needs to produce maximum power. The Arreche carburetor is one of the easiest to adjust, making it simple for you to get your air/fuel mixture dialed in and your scoot running the way it should.

Product Description

Arreche has produced one of the easiest carburetors to adjust on the market. The Arreche 19mm high performance carburetor features an easy to change main jet via a plug in the bottom of the float bowl - no more removing the carburetor to change the main jet! Each Arreche carburetor comes with a size 65 main jet installed. We also include a size 90 main jet that should be installed for use with a 70cc cylinder for proper tuning. We found that this set up works in almost all areas and elevations. For fine tuning your Arreche Carburetor, we have main and pilot jets available in all sizes.

The carburetor itself features a very robust design. The great design from Arreche make the carburetor a direct fit for many scooter makes (Yamaha Zuma and Vino, Kymco and Honda scooters just to name a few). Thanks to the superior design you can also do away with the separate cable and choke mechanism installations we're all used to with other carburetor brands.

This carburetor can be used with either a manual or auto choke Assembly (sold separately).

An upgraded carburetor is a must when using a 70cc cylinder kit and an expansion chamber pipe, otherwise your scooter will run too lean. The stock carburetor simply cannot flow the amount of air/fuel/oil needed to lubricate and cool the bigger cylinder with the pipe.

If used in cold weather (below 40 degrees), the manual choke is better suited for your carburetor.

This part fits on:


Elite SR

All 50cc 2T models

Technical Specifications:

Available diameter (Ø) - 17mm, 19mm, 21mm, 24mm
Robust design
Easily mounted - very direct fit
Main jet access from bottom of the float bowl, no need to remove the carburetor
Easily adjusted
Adjustable slide needle height

Additional Information

SKU 07.08194
Manufacturer Arreche
Manufacturer SKU 819/4

Product Tags

Add Your Tags:
Use spaces to separate tags. Use single quotes (') for phrases.